Fronius Acctiva Professional Flash User Manual download pdf (Page 59)

Display of charge

progress during

charging

IMPORTANT! the charger automatically switches over to conservation charging after ap-

prox. 3 - 7 hours, depending on the type of battery. To charge the battery completely, the

battery should remain connected to the charger for this length of time.

Connect (+) charging terminal to positive pole on battery

Connect (-) charging terminal to negative pole on the battery, or to vehicle body (e.g.

engine block) in the case of vehicle electrical systems.

Press start/stop button for approx. 5 secs

A query regarding correct polarity of the charging terminals is displayed:

Starting the charging process confirms the correct polarity connection. If there is no

confirmation of correct pole connection within 2.5 secs, the device reverts to menu

mode.

Ensure charging terminals are connected to correct poles

Start charging by pressing the start/stop button

The charger starts charging.

During charging, the number of bars indicates how charging is

progressing.

Final charging stage - once the battery is approx. 80 - 85 %

charged.

- Display shows 6 consecutive bars

- Battery is now ready for use

NOTE! Only in Refresh charging mode: When refresh charging has finished, the

machine switches off. Conservation charging does not take place.

When the battery is fully charged, the charger begins conser-

vation charging.

- all bars are permanently displayed

- The battery is 100 % charged.

- Battery is always ready to use.

- Battery can remain connected to charger for as long as re-

quired.

- Conservation charging counteracts battery self-discharge.

NOTE! To compensate, the charger can briefly increase the current to the maxi-

mum charging current (see Technical Data, user-defined settings in USER

menu).

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 159 160

No comments

Fronius Acctiva Professional Flash User Manual Page 59