Fronius Acctiva Professional Flash User Manual download pdf (Page 71)

Parameters in the USER U/I menu

Press the start/stop button

Display flashes.

Adjust the desired value of the selected parameter using the „up“ and „down“ buttons

Press the start/stop button to save the value

maximum charging current (standard charging)

Setting range: see Technical Data, in steps of 0,5 A

main charging voltage (standard charging)

setting range: 12.0 - 15.5 V, in steps of 0.1 V

conservation charging voltage (standard charging)

setting range: Off / 12.0 - 15.5 V, in steps of 0.1 V

IMPORTANT! the conservation charging voltage is only available in Charge mode. Con-

servation charging does not take place if conservation charging is set to OFF. However,

if the battery voltage drops below 12 V, charging starts

safety cut-out (standard charging)

setting range: 2 h - 30 h, in 10 min intervals

IMPORTANT! If charging does not end automatically after the set time has elapsed, the

charger will be switched off as a safety precaution.

maximum charging current (user charging)

Setting range: see Technical Data, in steps of 0.5 A

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 159 160

No comments

Fronius Acctiva Professional Flash User Manual Page 71