Fronius Acctiva Professional Flash User Manual download pdf (Page 53)

Fitting options

Fitting optional

edge guard

Depending on the device, a special edge guard can be fitted.

IMPORTANT! The edge guard must be fitted if the charger is being mounted on a wall, as

the fitting tools assume that an edge guard is present.

The edge guard must not be fitted if the charger is installed on the floor.

Fitting the edge guard

IMPORTANT! If the edge guard is to remain fitted to the charger permanently, peel the

cover strips off the adhesive strips.

Mounting on the

wall

Fit the charger to the wall using the optional wall bracket:

- Fasten the wall bracket to a suitable

wall surface using dowels and screws

- Position charger on wall bracket

The base of the charger must lie flat on

the wall bracket.

- Only if the charger is being fitted per-

manently to the wall bracket:

Fasten the charger to the bracket using

the two screws supplied (diameter 3.5

x 9.5 mm)

Fitting to the floor Fit the charger to the floor using the optional fitting brackets:

NOTE! If fixing to the wall, please note the weight of the charger. Only fix to a wall

that is suitable to this purpose.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 159 160

No comments

Fronius Acctiva Professional Flash User Manual Page 53