Fronius Acctiva Seller User Manual download pdf (Page 47)

Charging the battery

Starting charging

Connect mains cable to charger and plug into mains

– Charger is on standby

– Ready indicator lights up

If using the vehicle power supply, switch off ignition and all other devices consuming

power

Connect charger lead (red) to positive pole (+) on battery

Connect charger lead (black) to negative pole (-) on battery

Finishing charg-

ing

Press the Stop/Start button to complete charging

Disconnect the charger lead (black) from the negative pole (-) on battery

Disconnect the charger lead (red) from the positive pole (+) on battery

Interrupting

charging

Press the Stop/Start button while charging

– The process is interrupted

– Ready indicator flashes

Press the Stop/Start button again to continue charging

CAUTION! Danger of damage if attempting to charge a faulty battery or using the

incorrect charging voltage. Before beginning charging, ensure that the battery to

be charged is fully functional and the charging voltage of the device matches the

battery voltage.

WARNING! Danger of serious injury or damage from incorrectly connected

charging terminals. Connect charging terminals to correct poles and ensure prop-

er electrical connection to battery terminals.

25 % 50 % 75 % 100 %

CAUTION! Risk of sparks if the charging terminals are disconnected too soon.

Press the Stop/Start button to complete charging.

NOTE! Risk of damage to connection sockets and connecting plugs. Do not dis-

connect or unplug charger leads while charging.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 187 188

No comments

Fronius Acctiva Seller User Manual Page 47