Fronius Solar.service User Manual download pdf (Page 4)

ENDetailed view of

inverter

(continued)

Setup menu

The Setup menu is used to configure various inverter settings. More information about

the various settings can be found in the chapter entitled „Setup menu“ in the inverter

operating instructions.

Overview of switch-off limits

This menu provides a clear overview of the various switch-off limits of the inverter.

The text in brackets is an abbreviation of the switch-off limit that is shown on the inver-

ter display. Example: „Internal voltage limit min.“ is shown on the inverter as „UILmin“.

Switch-off limits can only be modified by a Fronius service engineer.

If a switch-off limit has been modified, the set values can be displayed again by clicking

„Refresh“.

Fan speed

The current speed of the fan is displayed.

A test can be carried out to check that the fan is working properly.

The fan test is started by pressing the „Fan Test“ button.

-> The fan is run at the set speed in % for a few seconds.

A fan test can currently be carried out on the following devices:

- Fronius IG 300 / 390 / 400 / 500

- Fronius CL 36 / 48 / 60

- Fronius Agilo 100.0-3

Detailed view of

Fronius String

Control

The following information is displayed:

- Software version

- Date of last analysis for energy deviation

- Fronius String Control readings: the electrical charge, the unit and the deviati-

on of the individual measuring channels compared with the average fed-in

charge is displayed

- Modules: shows the latest hardware and software versions of the components

installed in the device.

Detailed view of

Fronius Sensor

Card / Box

Shows the latest hardware and software versions and readings of the components

installed in the device.

Individual measuring channels can be activated / deactivated or configured in the Setup

menu.

Limitations The following connections are not possible in this version of the program:

- Fronius Converter

- Analogue and GSM modems

- Fronius Personal Display

The Fronius Power Control Box / Card is not supported.

Power stage sets

With Fronius CL / IG Plus only: the installed power stage sets can be manually started

and therefore tested.

Detailed view of

Public Display

Miscellaneous parameters of the Public Display and the displayed text can be set.

1 2 3 4 5 6 7 8 9 10

Fronius Solar.service 1

Comments to this Manuals

No comments

Fronius Solar.service User Manual Page 4

Comments to this Manuals

Related products and manuals for Equipment Fronius Solar.service